Bitmain Antminer S23e U2 Hyd 865 TH/s Bitcoin ASIC Miner

£10.090,00

Look out ahead with the Antminer S23e 2U 865 TH/s Hydro Miner running at an absolutely astonishing 10J/T breaking all efficiencies records to date. 1-Year Manufacturer Warranty

Añadir al carrito
Bitmain Antminer S23e U2 Hyd 865 TH/s Bitcoin ASIC Miner
Bitmain Antminer S23e U2 Hyd 865 TH/s Bitcoin ASIC Miner
£10.090,00

Compra con confianza

  • Devoluciones sencillas en 14 días
  • Pedidos listos en 24-48 h
Pago 100% seguro

Visa · Mastercard · pago cifrado con SSL

Bitmain Antminer S23e U2 Hyd 865 TH/s Bitcoin ASIC Miner
Bitmain Antminer S23e U2 Hyd 865 TH/s Bitcoin ASIC Miner
£10.090,00

Bitcoin · SHA-256 · Hydro-Cooled · 2U Rack
Antminer S23e U2 Hyd

865 TH/s at 10 J/TH in a sealed 2U chassis — Bitmain’s density play for operators who have already solved water.

865 TH/s
8,650 W
10 J/TH
No onboard fans
~21 units per 42U rack

Overview

The S23e U2 Hyd — Bitmain’s model designation is S23e U2H — puts 865 TH/s of SHA-256 hashrate into a single 2U rack slot at a rated 8,650 W, or 10 J/TH on the wall. It is one of the most efficient machines Bitmain has shipped, and by a wide margin the most hashrate the company has packed into two rack units.

There are no fans in this chassis. Heat leaves through a sealed coolant loop via UQD08 quick-disconnects, which is what makes the density possible — and what makes this a machine for facilities, not garages. A 42U cabinet takes roughly 21 of these, which is around 18 PH/s and 180 kW behind a single rack door.

If you already run hydro, this is a straightforward density and efficiency upgrade. If you don’t, read the deployment requirements below carefully before you buy — and talk to us first, so we can confirm the machine fits your infrastructure.

At a Glance
Hashrate
865 TH/s
Typical · SHA-256
Power Draw
8,650 W
At 35°C inlet coolant
Efficiency
10 J/TH
On the wall
Form Factor
2U
~21 units per 42U rack

Before You Buy: Deployment Requirements

This is industrial hardware. It will not run on a standard outlet and it cannot cool itself. You need all four of the following:

  • Industrial three-phase power. 380–480V AC, 47–63 Hz, up to 20 A. No 120V or single-phase 240V operation.
  • A coolant loop. 16–20 L/min flow per unit at 3.5 bar or less, with inlet coolant held between 20–50°C. UQD08 quick-disconnect fittings.
  • Heat rejection. Dry coolers, a cooling tower, or heat reuse — roughly 8.65 kW of thermal load per unit has to go somewhere.
  • Rack space and network. 2U per unit in a 19″ cabinet, plus RJ45 Ethernet.

Not sure whether your setup qualifies? Call us before ordering and we’ll go through your power and cooling with you.

Full Specifications
Manufacturer Bitmain Model Antminer S23e U2H (S23e Hyd 2U) Version 865T-10 Algorithm / Coins SHA-256 — BTC, BCH, BSV Typical Hashrate 865 TH/s Power on Wall 8,650 W @ 35°C inlet coolant Power Efficiency 10 J/TH @ 35°C inlet coolant Input Voltage 380–480V AC Input Frequency 47–63 Hz Input Max Current 20 A Cooling Hydro — sealed loop, no onboard fans Inlet Coolant Temperature 20–50°C Coolant Flow 16.0–20.0 L/min Coolant Pressure ≤ 3.5 bar Coolant Pipe Connector UQD08 Network Interface RJ45 Ethernet Rack Format 2U, 19″ cabinet Dimensions 600 × 483 × 86 mm Net Weight 29.0 kg (63.9 lbs) Gross Weight 32.5 kg (71.7 lbs) Storage Temperature -20–70°C (drained of coolant) Release 2026

Where It Sits in the S23 Hydro Family

The S23e U2 Hyd is the density-optimized middle tier: roughly 49% more hashrate per chassis than the base S23 Hyd, in a chassis one rack unit smaller than the 3U flagship.

Model Hashrate Power Efficiency Format
S23 Hyd 580 TH/s 5,510 W ~9.5 J/TH Hydro
S23e U2 Hyd — this unit 865 TH/s 8,650 W 10 J/TH Hydro 2U
S23 Hyd 3U 1,160 TH/s 11,020 W ~9.5 J/TH Hydro 3U, 2-board

Why Hydro
Density per square foot

Around 21 units in a 42U cabinet. Hitting the same hashrate with air-cooled hardware takes substantially more floor space and air handling.

Predictable power draw

With no fans swinging against ambient temperature, wall draw tracks the nameplate far more closely than on an air-cooled unit.

Recoverable heat

An air-cooled fleet scatters its heat into a room. A hydro loop hands it to you in a pipe at a usable temperature — which opens up heat-reuse options.

Quiet operation

No onboard fans means the chassis itself is near-silent. Facility noise comes from pumps and dry coolers, which are far easier to site and isolate.

Buying From BlueForge
  • Hydro experience. We’ve specified, deployed, and serviced liquid-cooled fleets. You get straight answers on loop design and heat rejection, not a spec sheet read back to you.
  • Manufacturer warranty. Covered under Bitmain’s factory warranty — exact terms confirmed on your order.
  • Deployment guidance. We’ll review your electrical capacity, loop design, and rack layout before you commit, not after the pallet lands.
  • Volume pricing. Rack-scale and multi-rack quantities priced individually. Tell us the target and we’ll put a number against it.
  • In-house repair. Hash board and control board diagnostics handled directly by our team.

Rack-Scale Deployments
Let’s size it properly.

Volume pricing, lead times, or a straight conversation about whether your current infrastructure can take these — we’ll give you a real answer.

Call 551-257-6020
Email Us

BlueForge Advisors LLC ·

Specifications per Bitmain’s S23e U2H product manual. Hashrate and power figures are manufacturer-rated and vary with inlet coolant temperature, flow rate, firmware, voltage, and pool conditions. Hydro hardware requires a correctly specified coolant loop; operating outside Bitmain’s stated coolant parameters may void warranty coverage.

Información adicional

Currency

Bitcoin

Cooling Technology

Hydro Cooled

Available Models

865T

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “Bitmain Antminer S23e U2 Hyd 865 TH/s Bitcoin ASIC Miner”
¡Deja tu opinión ahora y consigue un cupón!

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *